Sunfire
Sunfire HRSIW8AMP
Sunfire HRSIW8AMP
Couldn't load pickup availability
-
Amplifier designed exclusively for the Sunfire HRSIW8 in-wall subwoofer
-
500 Watt, all-discrete Class-D switching amplifier for maximum robustness
-
DSP system equalization for perfect frequency response
-
DSP adjustable crossover with 40-160 Hz range and your choice of 12-36 dB/octave slopes
-
DSP adjustable subsonic filter adjustable from flat to 40 Hz
-
DSP adjustable phase
-
DSP soft limiter prevents any clipping at the speaker and limits to 1.5% THD
-
Two line-level XLR balanced inputs
-
Two line-level RCA unbalanced inputs
-
Five-way gold-plated speaker binding posts
-
DSP settings can be locked/unlocked
-
DSP display includes graphic volume display
-
DSP menus and settings can be scrolled through and selected by the front panel knob and IR remote control
-
Storage and recall of DSP settings
-
SUB/LFE mode control
-
Smart standby power supply that servo-controls the main amplifier power for less than a half watt draw from the household mains during standby
-
Oversized heatsink for cool operation with any music
-
Discrete analog power supply with a large toroidal transformer for best reliability and least noise.
-
Front panel and remote control adjustable volume control
-
Five EQ mode presets to enhance all types of media
-
Night mode for reduced interference to other housemates when playing movies late into the night
-
12V trigger for advanced home system control
-
Remote Infrared sensor jack for the custom home installer
-
Audio sense timeout is adjustable from 5-30 minutes
Amplifier Output | 520 watts rms into 4° |
High Cut Filter | 40 Hz - 160 Hz adjustable, with an LFE bypass position 12 - 36 dB/octave adjustable slope |
Frequency Response | 33 Hz - 150 Hz (-3 dB) |
Output Levels | Greater than 106 dB peak SPL (includes room gain) Measurement is at 1 meter, anechoic |
Total Harmonic Distortion (amplifier) | Less than 0.5% at 500W into 4° |
Input Sensitivity (full output) | 23 mV rms at 38 Hz with volume control set to maximum |
Input Impedance | 49 k° for Line-Level input - 20 k° for XLR input |
Dimensions - Weight | 44.5 mm x 482.6 mm x 284.5 mm - 6.1kg |
Share

